Automatic Wire Feeder According To The Set Parameters

Automatic Wire Feeder According to the set parameters

Automatic wire feeder is under the control of microcomputer, can be set according to the parameters of continuous and stable delivery of wire automatic feeding device.

Wire welding is a very important part of the welding process, manual welding method of welding wire and so on more use of the welder fingers twist the wire to complete the wire feeding process, the welder operation wire is very inconvenient, therefore, manual wire Poor performance, poor consistency, wire feeding instability, resulting in low efficiency of welding production, welding molding consistency is poor. In addition, the welder welding wire length is limited, long time welding need to frequently take the welding wire, welding efficiency is low, and each welding wire will be completed when a small piece of welding wire can not be used, resulting in a waste.

The feeder body is rugged and lightweight and can be moved quickly to the next weld. The machine is compact, suitable for passing through small gaps and narrow spaces. It can be welded thick plate or thickness of 2.5mm (12 caliber) thin steel butt weld and fillet weld.

Wire harness extension cable, adapter cable, Linc-Fill accessory, horizontal welding and lap welding adapter, horizontal fillet weld adapter, butt welds, tracking system changer, filament twin arc adapter , Tracking system components, flux screen, magnetic flux screen separator, concentric flux cone assembly.

The weld centering regulator can speed up the adjustment so that the operator can quickly track irregular welds during the welding process. Adjust the range of 3-1 / 8 in. (79 mm) when using the workpiece clamp, adjust the range when using the steering wheel The minimum diameter is 10 ft (3.0 m) for the inner weld and 13 ft (3.9 m) for the outer weld.

The function indicator on the solid-state printed circuit board helps to troubleshoot and reduce downtime. The control box is conveniently placed on the top of the wire feeder (which can be fixed on the left side and can be fixed on the right side), eliminating the need to move the welding power back and forth to accommodate changes in operating procedures.

Wire and wire rods are the place where the wire is stored. The wire is supplied by the wire plate and is divided into inner and outer. Thin wire with inner winding, thick wire with outside Rao style. Coiled wire, the wire should be neatly arranged, do not cross, so as not to involve each other wire, affecting the normal operation of the wire. Welded wire shaft is also known as dead damping disc shaft, common wire rod shaft mostly plastic or aluminum, wire rod wire plate axis. The core part of the wire feeder is shown in the figure. The device is mainly composed of a wire feeding motor and a gear box, on which a wire feeding roller and a pressing roller are mounted. The pressing roller is pressed against the wire feed wheel by a roller frame and a pressing handle, and the pressing handle can be adjusted according to the different wire diameter Adjust the size of the compression force. Behind it is the wire straightening mechanism, which consists of three rollers, the distance between them can be adjusted according to wire conditions. In front of the wire feed wheel is the wire guide portion, which consists of a guide bushing and an outlet guide tube. The wire is sent from the groove of the wire feed wheel and the guide pipe is used as the inlet to ensure that the wire always enters the wire feed hose smoothly from the groove of the wire feed wheel. In order to fix the guide bush, the body also has a compression spring.